Oscuro

50 Watt CO2 laser cutter/engraver from China, ebay laser, blue and white laser

BuBizgb
Suscribirse
Vistas 269 440
93% 2 525 169

First week of playing with laser

Entretenimiento

Publicado el

 

16 abr 2017

Compartir:

Compartir:

Descargar:

Cargando.....

Añadir:

Mi lista de reproducción
Ver despues
Comentarios 75
Giteshwar Sahu
Giteshwar Sahu Hace 19 días
nice.. kya price hoga sir ji.... 9691312480 my watsapp number please sent in detale...
Rudayy65
Rudayy65 Hace 24 días
Does this machine engrave tumblers?
sem de zero
sem de zero Hace un mes
I have 80 watt ,,can i cut this object
Vytautas Kvedaras
Vytautas Kvedaras Hace un mes
Where i could get the spare parts? Want to replace x and especialy y axid pulley tension clasps. They are made very bad in factory
Milan Milanovic
Milan Milanovic Hace un mes
Pozdrav druže. Odličan video. Da li imaš možda vektore, skice i odakle ih nabavljas za sečenje ?
Milan Milanovic
Milan Milanovic Hace un mes
@BuBizgb može mail ?
BuBizgb
BuBizgb Hace un mes
A skidam po svuda, od fb, do raznih stranica kaj naletim ...vecinu toga sam crtam
kbelcar
kbelcar Hace 2 meses
Još imaš ovaj laser?
BuBizgb
BuBizgb Hace 2 meses
Da
julio torres
julio torres Hace 2 meses
Hi, I just got one similar to this one. Did yours come with a driver for your computer to read it?. I plugged mine with the included midi cable but nothing pops up.
Jie Zhang
Jie Zhang Hace 26 días
use RD works,when U install the software,it will automatically install driver for U,hope this will help U,my friend!
BuBizgb
BuBizgb Hace 2 meses
It came with some stuff but I think I didn't use it .... just from RD Works, tryed onec it worked good. I always use it with USB stick
AKMA WOODEN DOORS & CARVINGS
Price please. WhatsApp +919962984115
05w3z0
05w3z0 Hace 2 meses
Pozdrav, ja sam u procesu kupovine jednog ovakvog stroja samo nikako da se odlucim koji bi bio najbolji za moje potrebe :) gledam 40w i 50w i svi su relativno skupi pogotov sto me jos brine da li ce me cariniti ovi nasi :) Ja cu najcesce rezati sperplocu od cca 3mm pa me zanima koliko brzo cudo moze rezati?
05w3z0
05w3z0 Hace 2 meses
@BuBizgb jel preko alija ebaya ili nesto trece? :) ja pikiram na 40x40 za sad jer ovi veci su dosta skuplji a i u planu mi je CNC pa mi se bas ne uklapa u financijsku konstrukciju :D
BuBizgb
BuBizgb Hace 2 meses
Uzmi sto vec, meni je zao sto nisam uzeo veci. Zavisi koju sperplocu i koja snaga ... ja rezem od 7-12 mm/s. Uzmi iz EU, moj je iz Poljske dosao....
Arshad Hussain
Arshad Hussain Hace 3 meses
Price sir plz
babiumno1
babiumno1 Hace 3 meses
Looks good. I am impressed.
And A
And A Hace 4 meses
tell me what the song at 5:00
ProjeX
ProjeX Hace un mes
Darude - Sandstorm
BuBizgb
BuBizgb Hace 4 meses
esvid.net/video/v%C3%ADdeo-MjUKxIA6SBo.html
joey de vries
joey de vries Hace 4 meses
Do you have the link to this laser? So i can buy it
BuBizgb
BuBizgb Hace 4 meses
www.ebay.com/itm/50W-CO2-laser-system-engraver-engraving-cutting-DIY-complete-assemble-kits/151950059827?hash=item2360ede933:g:ZcsAAOSwa-dWl7Ea
Chris Henning
Chris Henning Hace 4 meses
Very nice video. I am looking for a machine like this myself. Can you tell me how high the power consumption over an hour running this machine is?
BuBizgb
BuBizgb Hace 4 meses
nope ... don't know that information. (:
Artur
Artur Hace 4 meses
Hi i will buy this vw buli files
BuBizgb
BuBizgb Hace 4 meses
I can share for free ... send me mail bubizgb at gmail com
Dva na kvadrat
Dva na kvadrat Hace 6 meses
Imaju li negdje parametri za graviranje i rezanje za razne materijale da se skinu?
BuBizgb
BuBizgb Hace 6 meses
ne bas ... pokusaj i proba
Darlington Uzoigwe
Darlington Uzoigwe Hace 6 meses
Hello, please I need help. I have this machine but unfortunately I am finding it hard to get started. I need a video guide. Most especially the graphics and the best software to use.
BuBizgb
BuBizgb Hace 6 meses
whatch this guys old videos, first 20 :D esvid.net/u-SarbarMultimediavideos?disable_polymer=1 esvid.net/video/v%C3%ADdeo-YvrMeUUzaBo.html
Ridz creation by Rida
pric
yasin osman
yasin osman Hace 7 meses
Alla mahad leh
Andres Diaz
Andres Diaz Hace 7 meses
Sorry for a question? If this machine works well to make trophy plates the plates are .015 thick metal and engravering information in round medals, I would appreciate an answer thanks
BuBizgb
BuBizgb Hace 7 meses
Metal no! It is to weak. Google fiber laser.
hell yeah
hell yeah Hace 7 meses
So nice! How do you get rid of the burnt smell?
killa vibes
killa vibes Hace 7 meses
how much is it please
zamfir valentin
zamfir valentin Hace 9 meses
I want really know you, 2 bad is impossible, I am stucked in italy
zamfir valentin
zamfir valentin Hace 9 meses
Hi BuBizgb, I need your attention please! I own the same machine but unfortunately I've touched the death button. I need the RDVSET and RDUSET files to get back online my machine. PLease can u share with us this files? I know there are a lot of begginers worldwide who made the same fatal mistake and we need help! Thank you (the chinese do not understand english, they made me an offer to resale their machines instead of sending the files, lol)
BuBizgb
BuBizgb Hace 9 meses
@zamfir valentin Im from Zagreb - Croatia (:
zamfir valentin
zamfir valentin Hace 9 meses
@BuBizgb not for the files, just for your soul :)
zamfir valentin
zamfir valentin Hace 9 meses
@BuBizgb I want to buy you a beer
zamfir valentin
zamfir valentin Hace 9 meses
@BuBizgb I live in Italy, I am Romanian, where from are you, where u live? I saw u talk polish? or other slavik language?
zamfir valentin
zamfir valentin Hace 9 meses
@BuBizgb thank you, hope there are still people like you in this world!
Seno Karisma Rasul
Seno Karisma Rasul Hace 9 meses
what lasser cutting brand do you use?
Akbar Raja Qadri
Akbar Raja Qadri Hace 10 meses
Sar kya price he lesar envrig dono ka
theskip1
theskip1 Hace un año
once again the obligatory bloody awful music.
Am Fil
Am Fil Hace 10 meses
No kidding. Awful.
BuBizgb
BuBizgb Hace un año
mute?! (:
MR. SPINOZA OZA OZA
MR. SPINOZA OZA OZA Hace un año
gledam gledam, kad ono Sretan Uskrs :D Sretan Uskrs 4.20. 2019.
MR. SPINOZA OZA OZA
MR. SPINOZA OZA OZA Hace un año
@BuBizgb ma iznenadilo me što je na hrvatskom zbog naslova. dobre košarice. pogotovo tram na kraju. ako se to može kupiti, molio bih te za neki kontakt. i poslušaj rap EP na mom kanalu kad uhvatiš vremena :D
BuBizgb
BuBizgb Hace un año
Jbg stroj dosao 10 dana prije Uskrsa ... napilio se tih zeceva odma (:
Fibra
Fibra Hace un año
Hvala za demo. Kakvi su utisci sad posle nekog vremena kakve probleme si imao? Jesi probao da seces akril 10mm?
Fibra
Fibra Hace un año
@BuBizgb Hvala na brzom odgovoru.
BuBizgb
BuBizgb Hace un año
Krepalo je 12V napajanje, promjenili smo diodu od 3€ i radi opet. Krepalo je glavno napajanje, kupio isto za 50€ i radi. Ugradio mA metar. Radi ok stroj, vrijedi te novce, ali nije cesto u pogonu. Dobar je za hobi, da radi 8 sati dnevno, trebalo bi bolje hladjenje i ne znam kako bi to izdrzao. Treba sloziti dobar i ravan stol i dobro podesiti zrcala. Trebalo bi i zamjeniti zrcala i lecu jel su dosta ne kvalitetna ova sta dodje s njim. Rezao sam 15mm akril u 3 prolaza jako sporo, odrezao je al nije neka sreca. 6mm moze u jednom prolazu sporo. Najbolji je za 3-4mm i akril i sperploca ... papir super reze (:
Md Imtiaj
Md Imtiaj Hace un año
Hello! brother.I am from Brother's Laser Cutting in Bangladesh. I need some gift item design for my collection. Can you share with me design.If you want to share with me design than you cansend me in my this mail. brotherslasercutting@gmail.com Thank you
Paul Kepner
Paul Kepner Hace un año
What thickness and type of wood is that?
Marco António
Marco António Hace un año
What power do engrave and cut that led base acrylic?
BuBizgb
BuBizgb Hace un año
Try it yourself. Engrave about 150mm/s 25% power ... cut 10mm/s 65% power ... try to install amper meter to be sure you don't overdrive tube. On mine 70% power is 14mA and that is maximum for that tube ... so 70% is actually 100%
Luke Cunningham
Luke Cunningham Hace un año
is the machine stock?
BuBizgb
BuBizgb Hace un año
Yes
Abe Coulter
Abe Coulter Hace un año
link please????
NW3D
NW3D Hace un año
Ebay son
allendearmando77
allendearmando77 Hace un año
what kind of wood is that?
BuBizgb
BuBizgb Hace un año
It says on video ...HDF 3mm ...it mostly here used for back plate of cabinet. These days I prefer plywood and mdf ...but hdf is cheaper.
rathish reddy
rathish reddy Hace un año
Price sir my watsup no 9985165365
Noemi Salgado
Noemi Salgado Hace un año
This machine cut gold names
BuBizgb
BuBizgb Hace un año
I don't sell them ... check on ebay
Builder's Mark
Builder's Mark Hace un año
We found it's better to separate the air & water power from the laser. These Chinese lasers switches & fuses don't hold up. Also saw a little better stability of laser etch/cut. Just a suggestion.
Shaozong Tian
Shaozong Tian Hace un año
hi sir, your idea is good, would you please give your suggestion to my email: sunalaser@163.com? thanks
Jenny Dai
Jenny Dai Hace un año
This video is pretty cool.Our factory comes from Shanghai, China and also produces the same machine. If you need more information, please contact: Whatsapp/Wechat/Skype:+86 15696788493 Email: jenny@shcmlaser.com
Raja Sridhar
Raja Sridhar Hace un año
How many 3ply corrugated boards does it cut one tome i mean boards one over other for box making
BuBizgb
BuBizgb Hace un año
I cut one by one. I think it is too weak to cut multiple boards at once. It is difficult to get non-bent material and the focus(the distance from the lens) is very important for a good cut. Maybe 60-80W laser could cut it. This machine might cut two 3mm plates at maximum power, but the first would probably be burnt a lot ...
Kiiro Yazumo
Kiiro Yazumo Hace un año
How expensive was that laser cnc machine?
Jenny Dai
Jenny Dai Hace un año
@gorch foth Yes , Our factory has 11 years manufacturing experience of laser cutting machine.
gorch foth
gorch foth Hace un año
@Jenny Dai do you know more about these Jenny
Jenny Dai
Jenny Dai Hace un año
Hello , this is jenny here from shanghai china .If you need Learn more details , you can contact my Whatsapp:+86 15696788493 Email:jenny@shcmlaser.com
BuBizgb
BuBizgb Hace un año
about 1500€
wekker090
wekker090 Hace un año
I have the 100 watt version. Works good so far.
Thumper J
Thumper J Hace un año
can you engrave on a zippo lighter
BuBizgb
BuBizgb Hace un año
you can't do metal. You can do anodized aluminium, and mark it. You can use CerMark, it isn't engrave, but you can mark it ... esvid.net/video/v%C3%ADdeo-BdHXiEw4KUg.html there are few more videos on yt (:
lramey20
lramey20 Hace un año
Does anyone know if this can do a rotary cut. Like on a cup?
Jenny Dai
Jenny Dai Hace un año
It can work with a rotary.Our factory comes from Shanghai, China and also produces the same machine. If you need more information, please contact: Whatsapp/Wechat/Skype:+86 15696788493 Email: jenny@shcmlaser.com
BuBizgb
BuBizgb Hace un año
yes it can! --> esvid.net/group/PLeKaKWOIPgi_XP6Nxzeapp-vUMCLQyVMB
Raja Dance Group Damoh M.P.
Price
beyondthegraveXL
beyondthegraveXL Hace un año
@BuBizgb 💀💀💀
BuBizgb
BuBizgb Hace un año
esvid.net/video/v%C3%ADdeo-l91ISfcuzDw.html
Don Mega
Don Mega Hace un año
gonna take hell of a lot of sanding to remove those burn marks. or many layers of paint lol
bcstractor
bcstractor Hace un año
Really? Have you ever used one?
Jorge Villalobos
Jorge Villalobos Hace un año
How has this machine held up? I want one for light work. Are they hard to learn?
BuBizgb
BuBizgb Hace un año
Epilog is good brand. It must run better than ebay laser. You have to decide what is best for you ... but if you can afford and you have space buy bigger than 500x300mm
Jorge Villalobos
Jorge Villalobos Hace un año
@BuBizgb so for the price would you reccomend I just get like an epilog laser for 4,000?
BuBizgb
BuBizgb Hace un año
It runs ok. You can get some better results if you change some parts like mirrors, lens, tube, PSU (: You have to have some basic technical knowledge, watch at least first 20 videos from this guy --> esvid.net/u-SarbarMultimediavideos?disable_polymer=1
Igor Uzon
Igor Uzon Hace un año
Pozdrav, zanima me koliki je radni vek lasera? I kako ste sve u svemu zadovoljni sa laserom? Uzeo bih ga za secenje sitnih detalja u brodomodelarstvu.
BuBizgb
BuBizgb Hace un año
Pozdrav, to ti je lutrija, cijevi su jeftine kineske, od 500-2000h ... moj sad radi godinu i pol, ne radim previse na njemu ... mozda oko 400h ... cijev kakva je unutra je oko 300€. Bio bi odlican za brodomodelarstvo, ja ga koristim za aviomodelarstvo (:
alennata22
alennata22 Hace un año
Pozz moze li molim te nekakav kontakt u vezi lasera bi imao par pitanja?? Hvala
BuBizgb
BuBizgb Hace un año
bubizgb @ gmail . com
Attila Nagy
Attila Nagy Hace un año
What pressure air is needed? what compressor do you use?
BuBizgb
BuBizgb Hace un año
I got compressor with machine! It is realy small and air pressure is just a little to help, but is much better with that and safer. You can use something small like for aquarium or similar. You see mine od 5:37 nothing special
Ionut Tarau
Ionut Tarau Hace un año
Hey! Very nice video ! Do You work in Photoshop or Corel? I think that making it in (drawing) Corel or any other program is the hard part. Any advice is welcome! Thanks for the video
BuBizgb
BuBizgb Hace un año
Hi, you need vector graphic. So Corel or Adobe Illustrator or free Inkscape. I mostly use CAD software like SolidWorks and export to .dxf. Easiest to open in this software is .dxf and .ai
Blackgraphics iqq
Blackgraphics iqq Hace un año
helo, whats is the area to cut? 30x40 cms?
BuBizgb
BuBizgb Hace un año
500 x 300 mm
ANA MY ID
ANA MY ID Hace un año
Can cut tempered glass thick 0.4mm?
BuBizgb
BuBizgb Hace un año
Didn't try ... I would say no ...
Pedro Servent
Pedro Servent Hace 2 años
algún consejo de que parámetros usar para el grabado laser en aluminio anodizado con c02
BuBizgb
BuBizgb Hace 2 años
depends on the quality of the material and the eloxation. For engrave I used 30% and 100mm/s and 40% and 90mm/s it is about 6-8mA?!
Elysium Productions
Elysium Productions Hace 2 años
Hey man, we are looking at also getting one of these for us here in South Africa. Do you think it works fine? Any specific troubles you had that we should lookout for? We are looking at the 60w option Looking forward to hearing from you Kind Regards
BuBizgb
BuBizgb Hace 2 años
For that price is great. My both PSU died. One was easy to repair for few € other one for tube I needed to buy new one, about 70€. Power is weaker then adverises. For best results you need some time to align mirrors, maybe get better ones. Get spare lens. If you will work a lot you need good cooling sistem like cw5000. Install mA meter to make sure you are not overdrive tube. Never put it on 100% power, watch mA meter ... and use less power and lower speeds ... u will learn by doing it! :)
lijalisica
lijalisica Hace 2 años
Pozdrav, gdje može da se kupi mašina?
BRAT Bore
BRAT Bore Hace un año
Kod mene brate
BuBizgb
BuBizgb Hace 2 años
ebay?!
Grzegorz
Grzegorz Hace 2 años
Does the laser engrave on glass ? . Does the laser laser engraves on cylindrical shapes? Is there a chance to engrave something in metal ? I care about marking things. Like a glass statuette, a cigarette lighter.
BuBizgb
BuBizgb Hace 2 años
I don't have a lot of photos, I'm lazy :) I'm building mini photo studio soon ... have all the parts, but no time :) few photos here --> drive.google.com/drive/folders/0B6nib3dC1LZkSXFGandERGJ3Vk0
Grzegorz
Grzegorz Hace 2 años
can you send me some of your work done with this scanner. Glass, wood. Thanks
BuBizgb
BuBizgb Hace 2 años
Yes it engrave on glass ... check this channel for more info --> esvid.net/show-UCqCyShJXqnElPTUnxX0mD5A You can engrave cylindical shapes with rotary attacment tool, I got it with my machine but still didn't try it. :) 50W is too small for metal, but you can mark some things, check that channel and google CerMark. I wouldn't recommend to engrave cigarette lighter if is gas inside :) Anodized aluminium can be good for engrave ... laser will remove just coat ... I tried few times, it looks good!
chen valtzer
chen valtzer Hace 2 años
what is the name of this model so i could find it? / what is the engraving size of the bed?
BuBizgb
BuBizgb Hace 2 años
500 x 300 mm, just type in ebay like title of this video ...
MakingLetters Luminárias de Leds
10mm/s com 50W muito lento!!!
BuBizgb
BuBizgb Hace 2 años
yes that is Chinese 50W :D
Jimmy ok
Jimmy ok Hace 2 años
Power Supply for this machine www.3dmaxprinter.com/shop/engraver/engraver-electronics-parts/50w-power-supply-for-engraving-cutting-machine/
MAJK MILER
MAJK MILER Hace 2 años
Dobro Vecer, super snimak i ja sam kupio taj laser. Super radi, adakle ti imas vector slike ili gdje trazis? Pozdrav is njemacke
MAJK MILER
MAJK MILER Hace 2 años
Hvala za linkove poz Majk
BuBizgb
BuBizgb Hace 2 años
iowa-my.sharepoint.com/:x:/r/personal/pjohanns_uiowa_edu/_layouts/15/WopiFrame.aspx?docid=13e6a3dcfe55840c49e2772184e9f109f&authkey=AbnYlOucNi7tcQ1WWgFWTkg&action=view
Harmonika lover
Harmonika lover Hace 2 años
Ja imam laser isto od 50 w... ovaj tvoj je noviji i moderniji cini mi se.,ali rade isti posao,htio sam te pitat koliku debljinu drveta i pleksija moze tvoj laser rezat.?
BuBizgb
BuBizgb Hace 2 años
zavisi od snage i brzine.Plexi 5mm reze sa 5mm/s na oko 80% snage. Rezali smo 15mm u 3 puta. Uglavnom rezem 3 i 4 mm i to ide na 12-10mm/s
Jolin liu -Shenhui laser
this machine is made by us-Shenhui laser company in china. sh-g350 model, my email is jolin@shenhuilaser.com our web: www.lcshenhuilaser.com. www.shenhuilaser.en.alibaba.com If need or want agent, please feel free to contact us.
Coal Akida
Coal Akida Hace 2 años
Can you cut 2mm thick neoprene ? or 3mm awesome video .
BuBizgb
BuBizgb Hace 2 años
Hi, I'm not sure ...probably yes but google more. I cutted 10mm airex in one pass very fast, 15mm plexiglass in 3 passes :) www.instructables.com/answers/Is-neoprene-suitable-for-laser-cutting/
Rafael Giovanella
Rafael Giovanella Hace 2 años
Cut aluminium and steel??
Ricard Rinaldo
Ricard Rinaldo Hace 2 años
A co2 laser will never cut any metal unless it is 200w+ and with added gas assist. For metal you normally use fiber.
MakingLetters Luminárias de Leds
Não corta.
The Best Stooge
The Best Stooge Hace 2 años
I can tell you NO unless 1-2mm thick at max.
MaDamme Rio
MaDamme Rio Hace 2 años
Hi, can you tell me where you ordered this cool LED Socket with spin?
MaDamme Rio
MaDamme Rio Hace 2 años
BuBizgb that works. thx
BuBizgb
BuBizgb Hace 2 años
Hi, I made my own turn table just for videography and photography ...something like this --> esvid.net/video/v%C3%ADdeo-Euaet3GfeqU.html LED base are from --> www.xstron.com/
toujabi
toujabi Hace 2 años
Hi, can you please tell me the supplier of your machine.
Cora Wei
Cora Wei Hace 2 años
Hello, This is Cora from Jinan Ginchoor CNC Equipment CO., LTD. We are a leading manufacture of cnc router machine and laser machine for more than 10 yearsin Jinan, If you are interested in laser machine, Please contact me. Email: info@ginchoorcnc.com whatsapp: +86 13791025737 skype: +86 13791025737
BuBizgb
BuBizgb Hace 2 años
For this price is great! 24V PSU died after few weeks, friend repaired it for 3€ ... fan from ventilation was stuck with few kicks it spins again :) ... I'm happy with results but need to align mirror, buy new better set, and better lens! I only have 100h on tube ... it is fine ... planning to upgrade it to real 60W ...It is good buy, good for hobby and side jobs!
toujabi
toujabi Hace 2 años
looks like he isn't selling at the moment.what is your experience with this model and its build quality and also its laser tube
BuBizgb
BuBizgb Hace 2 años
www.ebay.com/usr/greatroyal?_trksid=p2057872.m2749.l2754
Carlos Delgado
Carlos Delgado Hace 2 años
Thx, great info.
AlfaomegA
AlfaomegA Hace 2 años
Sretan uskrs i tebi ;)
BRAT Bore
BRAT Bore Hace un año
Uvek bio brate moj 🤣
friedchicken
friedchicken Hace 2 años
can it also cut 3 dimensional objects?
friedchicken
friedchicken Hace 2 años
thanks for taking the time to answer me. TY
BuBizgb
BuBizgb Hace 2 años
no, just 2D sheets but you can asseble 3D parts, like boxes, puzzles ... distance from head and part must be same all time to achieve focus
xianglei Shi
xianglei Shi Hace 2 años
Here's Kobe Shi from China. We are manufacturers of machine tools for laser engraving and spare parts. If you need anything that is made in China please contact us kobeshi@radiumwin.com.cn skype: kobeshi@outlook.com phone 8615166663089. Always answer your questions. With respect Kobe Shi radiumwin.en.made-in-china.com/ esvid.net/show-UCJm2pGZ0VXfIWDGu6az-xbA
ss ss
ss ss Hace 2 años
super , drugar..Lep video!. pitanje: zasto je ona "fioka" sa servo motorom? pretpostavljam da nesto pomera, ali ne mogu da skapiram za sta to moze da sluzi?...
BuBizgb
BuBizgb Hace 2 años
Dobio sam i ja to jos nisam stigo isprobat
ss ss
ss ss Hace 2 años
i.ebayimg.com/images/g/PyMAAOSw4shYAyne/s-l1600.jpg e hvala na odgovoru, ali izgleda da se nismo razumeli, a ni ti nisi dobio taj dodatak. Izgleda da je to rotacioni deo da rotira cilindricne materijale? Sad sam istrazio. Daju sada uz isti tvoj laser . Nema veze. Svako dobro
BuBizgb
BuBizgb Hace 2 años
ss ss mice z os, radni stol, lakse se podesi fokus/razmak do materijala da normalno reze :)
Eoin Kirwan
Eoin Kirwan Hace 2 años
Hi, Great videos. I am having issues getting my machine to work. I cannot connect the machine to my computer. When I go to load a file up it does not appear on the Display on the machine. Also, there is no red LED working on the machine. The laser head is stuck in the middle of the machine and will not move when I turn the power on. Any Suggestions?
BuBizgb
BuBizgb Hace 2 años
You can try with USB drive. In RDWorks SaveToUFile. Then on laser, read UFile and copy to memory. Watch videos from this guy esvid.net/video/v%C3%ADdeo-YvrMeUUzaBo.html. There is good FB group try ask ther ... facebook.com/groups/LaserEngravingAndCutting/
Srecko Nagy
Srecko Nagy Hace 3 años
Pa trebalo je sve te zečeke napraviti za Uskrs. Nadam se da neće ideje sada ponestati.
bessybessy
bessybessy Hace 3 años
Marko bravo, prvo 3D printer a sad ovo, super! I u KA ima mali CO2 laser samo vlasnik Marin i Kreso trebaju naucit kako ga koristiti, nema se vremena :)
Marko
Marko Hace 2 meses
@BuBizgb oko 1000e je kod nas. Imam ponudu da radim nešto sa tim laserom a nisam radio sa njim nikad. Radio sam sa cnc glodalicom tako da sto se tice smanjenja brzine nije problem 😃 Seče MDF od 3mm?
BuBizgb
BuBizgb Hace 2 meses
@Marko zadovoljan sam ... vrijedi te novce! Treba nauciti raditi s tim, bit oprezan, ne pretjerivati s brzinom i snagom i eto ... za mjesec dana ce biti 3 godine od kad sam ga uzeo ... jos uvijek radi ok! Trebalo bi neke stvari malo bolje podesit i redovnije odrzavat ali eto ... pili jos uvijek! :D
Marko
Marko Hace 2 meses
@BuBizgb pozdrav, planiram da kupim ovakav laser pa me interesuju neke inf. Kako bi mogli da uspostavimo kontakt? Ili minovde napisi jesi li zadovoljan s obzirom da je imas već neko vreme?
BuBizgb
BuBizgb Hace 3 años
Hahaha ... da treba dosta vremena, ja se isto ucim polako ....
Ante Bogdan
Ante Bogdan Hace 3 años
Imaš link od stroja?
alennata22
alennata22 Hace un año
BuBizgb jel moze kontakt na mail jos uvijek
BuBizgb
BuBizgb Hace 2 años
tek sad vidim poruku jbg ... moze bubizgb @ gmail com
Nenad Zdravkovic
Nenad Zdravkovic Hace 2 años
Mozes li ostaviti neki kontakt? Fb skype whatsup?
Ante Bogdan
Ante Bogdan Hace 3 años
A super je, sretan Uskrs, puno sreće s ovim i hvala na odgovoru, poz
BuBizgb
BuBizgb Hace 3 años
Marlon Brando imam ga tek 10ak dana, radna povrsina je 500x300mm ...ljudi stvarno svasta rade, papir, plexi, razne vrste drva, tkanina, koza, graviranje na staklo, case, kamen ...jos nisam stigo sve isprobat :)
A continuación
CLARO CIELO 😩
11:10
Vistas 1 003 027